Master Divider pics
2008-04-08 by casperelectronics
Hey y'all,
I just finished my Master Divider module and it works great!!! I put
some pics and video on my site which you can see here:
http://www.casperelectronics.com/finished-pieces/mini-modular-
sequencer/master-divider/
I also built a Pulse Divider and XOR/XNOR into the same module. It's
a real beast. I added LED outputs to the pulse divider steps which I
think are a MUST. I followed Ken's directions and attached an LED to
the emitter of each output transistor with a 1K resistor to ground.
I may end up building into it's own housing with a dedicated power
supply since it is running so many leds. It's such a cool looking
module, it might be nice to build a pulse generator into it then put
it in it's own housing and let it run on it's own......just cause
it's cool to watch.
[Non-text portions of this message have been removed]
I just finished my Master Divider module and it works great!!! I put
some pics and video on my site which you can see here:
http://www.casperelectronics.com/finished-pieces/mini-modular-
sequencer/master-divider/
I also built a Pulse Divider and XOR/XNOR into the same module. It's
a real beast. I added LED outputs to the pulse divider steps which I
think are a MUST. I followed Ken's directions and attached an LED to
the emitter of each output transistor with a 1K resistor to ground.
I may end up building into it's own housing with a dedicated power
supply since it is running so many leds. It's such a cool looking
module, it might be nice to build a pulse generator into it then put
it in it's own housing and let it run on it's own......just cause
it's cool to watch.
[Non-text portions of this message have been removed]