Cgs synth

So, I'm about to start final assembly on a ton of modules, and the CGS
VCO is first. On Mr. Biddulph's always helpful site, he lists 10 100K
linear pots and 3 22K linear pots. Since there's no one correct way to
wire this thing up, I was curious to which functions these pots
belonged. I ask both because this will be a difficult module to wire
up (a sample diagram would be SOOOOO helpful), and because 22K pots are
scarce as hen's teeth. Any help would be greatly appreciated.

Thanks-
dave

There are 2 trimpots on the board marked TRIM. They can be 20K, 22K or 25K
with the actual value being dependent upon the manufacturer. In the kits I
supply they are marked as 22K but 25K would be the other common value.

For the panel, the SHAPE pot is listed on the schematic as 25K. I now list
20K in my BOMs as this is the value supplied by ALPHA. Other manufacturers
may supply 20K, 22K or 25K all which should work fine. The other 2 pots are
the PW1 and PW2 pots which are listed on the schematic as 20K (!) again,
20K, 22K or 25K will work fine here. I supply 20K

Best Regards

(Mr) Laurie Biddulph
Phone: +61 (0)2 4340 0938
Mobile: 0400 257 645

Elby Designs
ABN: 70 022 727 605
http://www.elby-designs.com

This e-mail and any files transmitted with it are confidential and intended
for the addressee only.
If you are not the addressee you may not copy, forward, disclose or
otherwise use it, or any part of it, in any form whatsoever. If you have
received this e-mail in error please notify the sender and ensure that all
copies of this e-mail and any files transmitted with it are deleted.
Any views or opinions represented in this e-mail are solely those of the
author and do not necessarily represent those of Elby Designs.
Although this e-mail and its attachments have been scanned for the presence
of computer viruses, Elby Designs will not be liable for any losses as a
result of any viruses being passed on.

----- Original Message -----