Cgs synth

The -OUT 5 volt connection should be connected to the COM out of the +/- 15
volt section. If you measure across the +OUT and -OUT terminals you will see
there is 5 volts between them.

Ken

>Hi people,
>
>I`m a newbie in electronics wiring a new PSU for my modular, it`s a
>Powerone HBBA 40W, with three outpus: +15, -15 and +5. I`m geting the
>ground from the "com" , +15 from +OUT and -15 from -OUT, all this
>outputs in the +-15V board. There is a sub-board for the 5V and I`ve
>found that for getting 5V I must use both -OUT and +OUT.
>My question: What`s the common ground? must I bridge com and -OUT(for
>5V board)?
>Thanks,
>
>Josue Arias
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>
>
>Yahoo! Groups Links
>
>To visit your group on the web, go to:
> http://groups.yahoo.com/group/cgs_synth/
>
>To unsubscribe from this group, send an email to:
> cgs_synth-unsubscribe@yahoogroups.com
>
>Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>

_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>