if its not the first rev of the board you can use bi polar LEDs its pretty cool lookin!
google "richard brewster pugix cgs ssg"
On Sat, Aug 4, 2018 at 3:37 AM, <cgs_synth@yahoogroups.com> wrote:3 MessagesDigest #1980
Messages1a LEDs on SSGFri Aug 3, 2018 1:11 pm (PDT) . Posted by: "Mike Burnham" tardisstudiosA bit confused why there are 3 RLed on the pcb but only 2 on the BOM
Sent from my iPhone
Fri Aug 3, 2018 2:39 pm (PDT) . Posted by: "Paul Bower" unrecordingsWhat does the schematic say ?
Could be a typo in the BOM
> On 3 Aug 2018, at 21:11, Mike Burnham mikejburnham@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:
>
> A bit confused why there are 3 RLed on the pcb but only 2 on the BOM
>
> Sent from my iPhone
>
>
>
> This email has been scanned by Netintelligence
> http://www.netintelligence. com/email <http://www.netintelligence. com/email>
Paul Bower
Un! Recordings Limited
Company Reg. 06870185
www.unrecordings.co.uk
Fri Aug 3, 2018 3:33 pm (PDT) . Posted by: "Ken Stone" cg_synthJust a BOM error, 3 are used.
On Sat, Aug 4, 2018 at 7:39 AM, Paul Bower paul@...
[cgs_synth] <cgs_synth@yahoogroups.com> wrote:
>
>
> What does the schematic say ?
> Could be a typo in the BOM
>
> On 3 Aug 2018, at 21:11, Mike Burnham mikejburnham@...
> [cgs_synth] <cgs_synth@yahoogroups.com> wrote:
>
> A bit confused why there are 3 RLed on the pcb but only 2 on the BOM
>
> Sent from my iPhone
>
> ------------------------------
> This email has been scanned by Netintelligence
> http://www.netintelligence. com/email
> ------------------------------
>
>
>
> *Paul BowerUn! Recordings Limited*
> Company Reg. 06870185
>
> www.unrecordings.co.uk
>
>
>
--
Ken Stone otherunicorn@...
The CGS Modular Synth home page: http://www.cgs.synth.net/
--