Hi,
I need some help in getting the SPM to work.
I've soldered up all the components and pots and the links and even added a link at the 0v above the 100uf caps.
When I power up the unit, the leds don't blink and unless I touch one side of the cable linking to the led, on the end of the led, the led lights up but it doesn't blink.
I'm using yellow leds for the individual oscillator. And I've connect a orange led to the LED driver section and LD driver to the output of the banana jack that i'm using.
I'm using MOTM power distribution board from CGS and only +15v, 0v, 0v, -15v is connected.
I can't figure out where i went wrong. Any ideas or help would be greatly appreciated!
Thanks
best
Dennis
I need some help in getting the SPM to work.
I've soldered up all the components and pots and the links and even added a link at the 0v above the 100uf caps.
When I power up the unit, the leds don't blink and unless I touch one side of the cable linking to the led, on the end of the led, the led lights up but it doesn't blink.
I'm using yellow leds for the individual oscillator. And I've connect a orange led to the LED driver section and LD driver to the output of the banana jack that i'm using.
I'm using MOTM power distribution board from CGS and only +15v, 0v, 0v, -15v is connected.
I can't figure out where i went wrong. Any ideas or help would be greatly appreciated!
Thanks
best
Dennis