The output of that clock probably has sloped transitions.
On Tue, Jun 23, 2015 at 4:26 AM, spunraddish@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:Thanks everyone! I switched out the 072 and placed a cap across the power pins of the 4015 and it works just fine! I find that I get the previous issues only with a particular source of clock in my staple system as it pertains to the gated comparator, and I know it's not pulse width or clock rate; it may something to do with the output level, I'll investigate this on my own. Strange, since it works just fine with other clocks that are bipolar oscillators with entirely varied pulse-widths.
Again, thanks!Eric
--