I know I sounds obvious but did you also do the track cuts in the mod ?
On 4 May 2015, at 2:37 am, "spunraddish@... [cgs_synth]" <cgs_synth@yahoogroups.com> wrote:
Thanks for the info guys.So far it seems that the mods were done correctly, as far as signal continuity is concerned across the correct channels. The 5k6s are in the correct spots. I know I'm tapping the CV outputs just fine as well, and I have installed attenuators for the cv anyway, for both the pan and gain cv, which are simple ccw ground lug attenuators, nothing special.My main concern is the directional congruity between the pan knobs and the spatialization, so I guess I'll try and see if the resistors are correct on each pcb.