Thanks Ken
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Saturday, August 3, 2013 9:44 PM
Subject: Re: [cgs_synth] CGS76 Serge 1973 Env Gen question
They are needed. They are marked so people know which resistors to change if
they wish to adjust the regulator for 15 volt use. It is mentioned in the
notes at the bottom. It isn't critical.
synths.
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
[Non-text portions of this message have been removed]
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Saturday, August 3, 2013 9:44 PM
Subject: Re: [cgs_synth] CGS76 Serge 1973 Env Gen question
>Hi Ken and allCCW) and the 2.2K and 1.8K in the 6V regulator section.
>
>I'm building up the OCB for the Serge 1973 Env Gen.
>
>There are three resistor i'm unclear on.
>
>33K# x 2 (Window size CV and Hold Input) , 22K# x 2 (Duration pot CW and
>I'm assuming the 22K's are there if you are using a 25K pot for Duration.yes. Use 100k with 100k pot, 22k with 25k pot.
>Just need to know if the 2.2K and 1.8K in the 6V regulator section aresupposed to be put in or left out. I'm not installing in a Vintage Serge.
They are needed. They are marked so people know which resistors to change if
they wish to adjust the regulator for 15 volt use. It is mentioned in the
notes at the bottom. It isn't critical.
>The 33K's have me stumped.Origianlly 33k on the Serge units. 100k would be more appropriate for modern
synths.
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
[Non-text portions of this message have been removed]