Cgs synth

Sounds like there is too much gain somewhere. Your SPAN may not be set
propperly yet. Deal with that first. Also make sure you have the right value
resistors installed.
If you still have problems, increase the 1M resistor to 2M2.

>If it's working from about 10'o clock to about 2 o'clock this is normal

before it will go into lfo territory.

>
>There's a mod i read about somewhere that changed that behavior as well as

the fine tune knob to function as you would expect.I don't remember were it
was but google or check on electro music forum.

>
>--- In cgs_synth@yahoogroups.com, djstorm <djstorm23@...> wrote:
>>
>> Hi,
>>
>> I'm working on a cgs48 vco where the frequency knob only works on the
>> middle of it's range. About 50% of the knob travel (25% on each end)
>> causes the VCO to cut out and not function. I have a theory that it's
>> probably somewhere in the cv summing area that is not working correctly,
>> but I'm not finding anything that is clearly "wrong". Any suggestions on
>> what to check?
>>
>> Thanks!
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>