Cgs synth

If temperature compensation is not critical to you or you need to get the
unit running in the meantime, then fit a 1K 1% Metal Film resistor, will
work fine unless you take the unit with you in to the sauna, then in to the
cool room and then on to the beach and then up the mountains.......

Best Regards
Laurie Biddulph
Mobile: 0400 257 645
Phone: +61 (0)2 4340 0938
Web: www.elby-designs.com
Skype: widgetoz

Elby Designs
9 Follan Close
Kariong
NSW 2250
Australia

-----Original Message-----
From: cgs_synth@yahoogroups.com [mailto:cgs_synth@yahoogroups.com] On Behalf
Of sasami@...
Sent: Thursday, December 13, 2012 10:36 AM
To: cgs_synth@yahoogroups.com
Subject: Re: [cgs_synth] Tempco

You need a 1k 3300ppm tempco. That IS what the part is. Yes, it's for
temperature compensation. This one
http://www.elby-designs.com/contents/en-us/p145.html will do the job. It is
what I use. Other synth DIY sites may also sell them.

>Hi there. This is a beginner question.
>
>I'm planning to make the VCO but what does 1k 3300ppm Temco mean on the

parts list?

>It's for the temperature compensation, isn't it? But what kind of
>resister

do I need to use, just 1% metal film?

>
>Kind Regards
>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/ Yahoo!
>Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/> Australian Miniature
Horses & Ponies <http://www.blaze.net.au/~sasami/>



------------------------------------

The CGS Modular Synth home page: http://www.cgs.synth.net/ Yahoo! Groups
Links