The 10Rs means 10 Ohm resisters for R1 and R2.
Thanks
Thanks
--- In cgs_synth@yahoogroups.com, "fuyuhiko" <hiko_goldenballs@...> wrote:
>
> Hi there.
> This is not a question for the CGS circuits but is for an ADSR envelope
> I've been making.This is the schematics.
>
> [http://yusynth.net/Modular/Commun/ADSR/ADSR-V2-sch-thumb.gif%5d
> <http://yusynth.net/Modular/Commun/ADSR/ADSR-V2-sch.gif>
> Even though I've succeeded to make it on solderless breadboard, I now
> suffer from smoke on the both 10Rs of the power supply. As soon as I
> connect the power it happens.To be honest when I finished soldering
> first time it worked but in an odd way, then I realised that I hadn't
> connected -15V to the pin 11 of the TL074 and connected +15V to pin 5. (
> very careless mistakes) This time there was not any smoke but since I
> connected again.
> I've checked all connections but no idea of how to make it work since
> I've made the same power circuit four times.
> Does anyone suspect any particular parts? Or should I solder it from
> scratch again?
> Sorry for the question that is not for the CGS.
> Kind Regards
>
>
>
>
> [Non-text portions of this message have been removed]
>
