Thanks Ken,I'll give that a shot.
Yeah,the cap on the smd didn't seem to make any difference concerning the noise.
Yeah,the cap on the smd didn't seem to make any difference concerning the noise.
--- In cgs_synth@yahoogroups.com, "cg_synth" <sasami@...> wrote:
>
> Run it's power wires back to the PSU itself, not to the local distribution point. It is a common VCO problem associated with the resistance of the wires themselves.
> The SMD pads would be for 100n, as per what you did. They were probably added as an optional afterthought. It was a long time ago!
> Ken
>
> --- In cgs_synth@yahoogroups.com, "adematteo" <adematteo@> wrote:
> >
> > Hi guys,
> > I recently built the bi n tic and am having some issues with it regarding noise from it's osc. coming through other modules from the bus i presume.I've installed all the ferite's and caps that Ken suggests and although i couldn't find any documentation regarding the smd pads on the back i soldered in 1 100n cap on those pads.
> > I'm running the module on a 12v supply also.
> >
> > Any help troubleshooting this would be greatly appreciated.
> > Thanks, Tony
> >
>