Thanks Ken and everyone else !
________________________________
From: charles kerr <thebadproducer@...>
To: cgs_synth@yahoogroups.com
Sent: Wednesday, January 11, 2012 10:23 AM
Subject: Re: [cgs_synth] Ferrite Beads
This might be of some interest!
http://www.muffwiggler.com/forum/viewtopic.php?t=49754
________________________________
From: charles kerr <thebadproducer@...>
To: cgs_synth@yahoogroups.com
Sent: Wednesday, January 11, 2012 10:23 AM
Subject: Re: [cgs_synth] Ferrite Beads
This might be of some interest!
http://www.muffwiggler.com/forum/viewtopic.php?t=49754
--- On Tue, 10/1/12, Stephen Richards <okayjustalittle@...> wrote:
From: Stephen Richards <okayjustalittle@...>
Subject: [cgs_synth] Ferrite Beads
To: "cgs_synth@yahoogroups.com" <cgs_synth@yahoogroups.com>
Date: Tuesday, 10 January, 2012, 23:19
Hi Ken
I bought some Ferrite Beads for BOCGS builds i'm doing in the next few months.
I just wanted to make sure they were OK to use on your PCB's ; i know very little about differences in Ferrite Beads.
They are : 3.5 x 5 mm , 60 Ohm@ 1000Mz.
I was a little worried the resistance was too high.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]