Cgs synth

Hi Ken -

Thank you for the clarification - I appreciate it!
Back to soldering & learning :)

- Adam

On May 31, 2011, at 5:05 PM, cg_synth wrote:

> Look at the transistor markings on the PCB. Two have a tiny arrow
> pointing inwards. These are the BC557. They are at the end of the
> board with the unicorn. One is near the unicorn, and the other is
> about 1/2" diagonally away from it.
> All the rest have the little arrow pointing outwards and are BC547.
> You cannot use all BC547.
> Ken
>
> --- In cgs_synth@yahoogroups.com, "Adam" <ads@...> wrote:
> >
> > Hi all,
> >
> > Probably a "newbie" question - but I need to check:
> >
> > I'm building a CGS36 ver1.3, and the BOM says 2x BC557, and 12x
> BC547. Then on the PCB, its simply says "Transistors BC547,
> BC557"...... so my question is where do the BC557's go? Does it
> matter - or can I all BC547's?
> >
> > Thanks very much for any help - I did check the archives.. but no
> luck.
> >
> > - Adam Scramstad
> >
>
>
>



[Non-text portions of this message have been removed]