Cgs synth

20k linear of the regular sort. Finding the zero position is usually not too
hard. Center detent pots introduce a "dead band" where it is impossible to
make fine adjustments because they keep snapping into their detent position.

Ken

>What kind of pot do you need for the "processor". Doesn't this pot
>need to be a center detent pot since it should always be at 0 when
>it's in the middle position? So when you turn the pot towards the
>left, it should be going negative and positive from 0 to the right,
>correct? Where can I find a pot like this? I need a knurled type which
>is probably rare.
>
>thanks,
>pete
>--
>www.p23.biz
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>