2009/10/6 Guy <guy@...>
value will be too low, and not as in your case, too high, so that's
not likely to be your problem. Still, I wanted to mention it in case
it might be relevant.
As for your actual problem, I'm chiming in with Loscha, guessing that
your problem is that the meter has a problem measuring high resistance
values.
--
/Ove
-----BEGIN 2ROT13 MESSAGE-----
Blog:
<http://gameboygenius.8bitcollective.com/>
SKRIVA på Lysator. Ditt Ahrvid-fria alternativ:
<http://lists.lysator.liu.se/mailman/listinfo/korkek?SKRIVA?>
Sätt på ett par flipflops, vippa på rumpan
och gör det här till en minnesvärd sommar!
-----END 2ROT13 MESSAGE-----
> I don't understand why you say "it doesn't matter because the value is too high", Ove ? Of course it matters - I need 22M, not 32M.Hello. My point is that if you touch the probes with your fingers, the
> 10M + 10M + 2M in series ought to be (around) 22M...
>
> I measure pre-mounted, and I don't touch anything with my hands; just using the probes.
value will be too low, and not as in your case, too high, so that's
not likely to be your problem. Still, I wanted to mention it in case
it might be relevant.
As for your actual problem, I'm chiming in with Loscha, guessing that
your problem is that the meter has a problem measuring high resistance
values.
--
/Ove
-----BEGIN 2ROT13 MESSAGE-----
Blog:
<http://gameboygenius.8bitcollective.com/>
SKRIVA på Lysator. Ditt Ahrvid-fria alternativ:
<http://lists.lysator.liu.se/mailman/listinfo/korkek?SKRIVA?>
Sätt på ett par flipflops, vippa på rumpan
och gör det här till en minnesvärd sommar!
-----END 2ROT13 MESSAGE-----