Hi everybody,
On this subject I can testify that I had no problem to reach the FAQ page this morning (after reading the original complaint), but trying again now,(after reading Mark's post) all i've got was truly theCGS home page.
Hoever, I've made a PDF print copy of the FAQ, nso if anybody needs it urgent, let me know, I can send it.
Ehud
________________________________
From: Mark Olson <lessismo@...>
To: cgs_synth@yahoogroups.com
Sent: Wed, September 30, 2009 3:26:42 PM
Subject: Re: PARTS FAQ (was[cgs_synth] capacitor advice)
Hmmm...
I sent my original message from home where I used my Mac, Safari,
Camino, and Firefox, all no go.
Now I'm at work and have tried a Mac with Safari and Camino, and a
windows box with both firefox and ie, all still not go.
As for viewing the source, regardless of where I am in http://www.cgs synth.net/
when I try to see the source all I get is the html for the home page.
What I know about about html would fit into a frog's ear so I leave
the problem solving to better men :-)
Mark
On this subject I can testify that I had no problem to reach the FAQ page this morning (after reading the original complaint), but trying again now,(after reading Mark's post) all i've got was truly theCGS home page.
Hoever, I've made a PDF print copy of the FAQ, nso if anybody needs it urgent, let me know, I can send it.
Ehud
________________________________
From: Mark Olson <lessismo@...>
To: cgs_synth@yahoogroups.com
Sent: Wed, September 30, 2009 3:26:42 PM
Subject: Re: PARTS FAQ (was[cgs_synth] capacitor advice)
Hmmm...
I sent my original message from home where I used my Mac, Safari,
Camino, and Firefox, all no go.
Now I'm at work and have tried a Mac with Safari and Camino, and a
windows box with both firefox and ie, all still not go.
As for viewing the source, regardless of where I am in http://www.cgs synth.net/
when I try to see the source all I get is the html for the home page.
What I know about about html would fit into a frog's ear so I leave
the problem solving to better men :-)
Mark
On Sep 30, 2009, at 7:59 AM, Dave Kendall wrote:
> FWIW,
> the link doesn't work for me either from the home page.
>
> The big Red FAQ link works OK, but the link at the bottom of that page
> to the Parts FAQ comes up with Error 404...
>
> cheers,
> Dave
> (using Safari on Mac)
>
> On Sep 30, 2009, at 07:04, Jason Proctor wrote:
>
> > that page works fine from here, and looking at the source it's
> > absolutely bog-standard HTML. are you experiencing other
> connectivity
> > issues?
> >
> > J
> > (in San Francisco)
> >
> > >Ken:
> > >This is such a useful faq; thank you.
> > >Perhaps you already know, but something's not right with the link
> to
> > >it on your Web site. I tried different browsers and none would get
> > >the page.
> > >Were it not for the link in your message I might never have seen
> this
> > >great resource.
> > >Thanks,
> > >Mark
> > >
> > >On Sep 27, 2009, at 7:08 PM, sasami@hotkey. net.au wrote:
> > >
> > > > Try reading: http://www.cgs synth.net/ modules/parts_ faq.html It
> > >> should help
> > >> you. Failing all else, you can just use the metalized polyester
> for
> > >> everything.
> > >>
> > >> >Hi there,
> > >> >
> > >> >I'm in the process of putting together digital noise and tube
> vca
> > >> modules,
> > >> but I'm fairly new to this hobby and am a bit confused about the
> > >> appropriate
> > >> capacitors to use. I'd appreciate some advice.
> > >> >
> > >> >When would a ceramic capacitor and when would a metalized
> > polyester
> > >> capacitor be more appropriate, or does it makes much of a
> > difference?
> > >> >
> > >> >Based on the photos of assembled boards I'm assuming that the
> 100n
> > >> caps on
> > >> the tube vca board are wima types (which I've been told are ideal
> > >> for audio
> > >> path type applications) , and the 47 pf caps are regular ceramic.
> > I'm
> > >> less
> > >> sure about the digital noise board.
> > >> >
> > >> >Thanks in advance.
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >----------- --------- --------- -------
> > >> >
> > >> >The CGS Modular Synth home page: http://www.cgs synth.net/
> > >> >Yahoo! Groups Links
> > >> >
> > >> >
> > >> >
> > >> >
> > >> ____________ _________ _________ _________ _________ _________ _
> > >> Ken Stone sasami@hotkey. net.au
> otherunicorn@ virginbroadband. com.au
> > >> Modular Synth PCBs for sale <http://www.cgs synth.net/>
> > >> Australian Miniature Horses & Ponies <http://www.blaze net.au/
> > >> ~sasami/>
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > >[Non-text portions of this message have been removed]
> > >
> > >
> > >
> > >----------- --------- --------- -------
> > >
> > >The CGS Modular Synth home page: http://www.cgs synth.net/
> > >Yahoo! Groups Links
> > >
> > >
> > >
> >
> >
>
>
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]