I'll be in for 4!
--- In cgs_synth@yahoogroups.com, "intellijel" <danjel@...> wrote:
>
> I will definitely be buying 2-4 of the euro sized pcbs when they are out!
>
>
>
> --- In cgs_synth@yahoogroups.com, sasami@ wrote:
> >
> >
> > >i hope you get enough this time that they don't sell out quite so quick ;)
> >
> > I ordered twice as many as I expected I would need. It was just that instead
> > of ordering two each, every one seemed to want four!
> > There is still a component value I need to check before I run them again,
> > and interuptions have prevented me from finishing up my test unit.
> >
> > On the Euro version there is a capacitor that is 2n2, when in the original
> > designs it was 22n. My mistake. Increasing the corresponding resistor to
> > 220k solved the issue without me ever realising the mistake - I thought it
> > was due to the higher gain of the transistors used.
> > This 6 x 2 board has the capacitor correctly marked at 22n BUT the resistor
> > is still 220k, where it should probably need to be 22k. It is the resistor
> > connected to the four emitters of the transistor core.
> >
> > Keep this in mind when assemblin it. There is a spare 22k resistor in the
> > parts list for this reason.
> >
> > Ken
> > _______________________________________________________________________
> > Ken Stone sasami@ otherunicorn@
> > Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> > Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
> >
>