>i hope you get enough this time that they don't sell out quite so quick ;)I ordered twice as many as I expected I would need. It was just that instead
of ordering two each, every one seemed to want four!
There is still a component value I need to check before I run them again,
and interuptions have prevented me from finishing up my test unit.
On the Euro version there is a capacitor that is 2n2, when in the original
designs it was 22n. My mistake. Increasing the corresponding resistor to
220k solved the issue without me ever realising the mistake - I thought it
was due to the higher gain of the transistors used.
This 6 x 2 board has the capacitor correctly marked at 22n BUT the resistor
is still 220k, where it should probably need to be 22k. It is the resistor
connected to the four emitters of the transistor core.
Keep this in mind when assemblin it. There is a spare 22k resistor in the
parts list for this reason.
Ken
_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>