hey Richard,
i don't think plans for selling the assembled MOTM VCS crystallised
into anything, but in any case a number of MOTM format PCBs were
produced and these were offered by Seth on various lists a while
back. the circuit is the Serge one brushed up by Ken, i think.
looking at the schem that Ken sent me the value is 50k linear i
think, but the part that's got me asking is the "pull for nonlinear"
function on the pot. on the PCB, there's a foot print for what looks
like a DPDT switch behind the pot, with a line around it that
suggests there is a pot/switch combo with that function.
it might well be the same part as the Frac version. does anyone have
one and can check?
tx
j
i don't think plans for selling the assembled MOTM VCS crystallised
into anything, but in any case a number of MOTM format PCBs were
produced and these were offered by Seth on various lists a while
back. the circuit is the Serge one brushed up by Ken, i think.
looking at the schem that Ken sent me the value is 50k linear i
think, but the part that's got me asking is the "pull for nonlinear"
function on the pot. on the PCB, there's a foot print for what looks
like a DPDT switch behind the pot, with a line around it that
suggests there is a pot/switch combo with that function.
it might well be the same part as the Frac version. does anyone have
one and can check?
tx
j
>Hi Jason,
>
>How would we know the values of those? Isn't it a proprietary circuit?
>Did you buy one and are converting it to a MOTM panel?
>
>Richard Brewster
>
>Jason Proctor wrote:
>> i'm putting together the parts for an MOTM format Bananalogue VCS and
>> i'm wondering if anyone has a good part number for the rise & fall
>> pot/switch combos? thanks...
>>
> >