Hi all.
Am just finishing off building a CGS31, and plan to have 2 CV inputs
AND a rate pot. First thought was to simply add aCGS04 mixer, with 2
regular inputs, and another input wired as a voltage divider between
+15V and GND, then take the output to the CV input on the CGS31 board.
But I notice that the pot is 25K, and the CV input goes via a 10K/100K
resistor divider. Would simply adding a CGS04 with 100K pot and 100K
input resistors screw things up at all?
cheers,
Dave
Am just finishing off building a CGS31, and plan to have 2 CV inputs
AND a rate pot. First thought was to simply add aCGS04 mixer, with 2
regular inputs, and another input wired as a voltage divider between
+15V and GND, then take the output to the CV input on the CGS31 board.
But I notice that the pot is 25K, and the CV input goes via a 10K/100K
resistor divider. Would simply adding a CGS04 with 100K pot and 100K
input resistors screw things up at all?
cheers,
Dave