Cgs synth

you could not do it with one, as it would suffere from exactly the same problem. I stillt hink you are best gating the outputs. Have a look at the gate sequencer. It was designed to do what you are trying to get this to do. You could probably even use the gate sequencer buffer boardf to solve your problem.

Quoting lexvortex <afonso_david@...>:

> If I was to use a CGS24 gate to trigger converter, would I need to
> have the 8 gate channels of the sequencer go into 8 separate channels
> of gate to trigger conversion that would then go go to the mix gate
> out (between the gate out and the switch), or would I just use one
> converter at the end of the mix gate out?
>
> Thanks,
> Dave
>
>
> --- In cgs_synth@yahoogroups.com, sasami@... wrote:
>>
>> > Thanks for the suggestions. I have finally gotten a chance to try
>> >out your second suggestion. I put 100n caps between each gate out and
>> >the bottom lug of the switch and then a 100k resistor between the mix
>> >gate out and ground (I tried without the 100k first). The mix gate
>> >out now does not trigger at all and the individual gates still only
>> >trigger every second step. Did I miss something?
>>
>> you are trying to make gate to trigger converters here. Yes, 22k is
> too low
>> a value. Thinking about it, you syould probably add a diode in
> series with
>> each cap too.
>>
>> > I'm not sure how to do the first suggestion [cutting the inhibit in
>> >to the gate 4051 (pin 6 )and connecting it to the clock instead (pin 7
>> >of the quad op-amp)], if I do try it should I first take out the 100n
>> >caps and the 100k resistor?
>>
>> Yes, I would take them out first. This method would be the better
> method of
>> doing it.
>>
>> Ken
>> _______________________________________________________________________
>> Ken Stone sasami@...
>> Modular Synth PCBs for sale <http://www.cgs.synth.net/%5b1]>
>> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/%5b2]>
>>
>
>
>
> ------------------------------------
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/%5b3]
> Yahoo! Groups Links
>
>
>
>

Links:
------
[1] http://www.cgs.synth.net/
[2] http://www.blaze.net.au/~sasami/
[3] http://www.cgs.synth.net/
[4] http://groups.yahoo.com/group/cgs_synth/
[5] http://groups.yahoo.com/group/cgs_synth/join
[6] http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]