The capacitor from RSS to ground seems to do the trick, going to
experiment a little more with it...
Thanks for the help,
Andrew
experiment a little more with it...
Thanks for the help,
Andrew
--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
> What you have done sounds correct.
> First discconnect the wire from RSS and see if you still have problems.
> Yes - you've disturbed something else. perhaps investigate the input
stage.
> Did you swap the LM342 for a TL074?
> No - you are picking up nise through your wires. Try adding a capcitor
> between RSS and 0V. Start with 1n (1000pf). if that isn't good
enough, try
> 10n (0.01uF),
>
> Ken
>
> >Yes, it worked perfectly, plus I added eight pots normalized to the
> >inputs. Works perfectly as an eight-step sequencer too. I've wired the
> >10-step rotary:
> >1> NC
> >2-9> 1-8 gate outputs
> >10> NC
> >Common> RSS
> >That's how I understand it from the description... maybe I'm
> >misunderstanding somewhere.
> >Thanks,
> >Andrew
> >
> >--- In cgs_synth@yahoogroups.com, sasami@ wrote:
> >>
> >> first question - did it work right before you added the switch?
> >>
> >> ken
> >>
> >> >Anyone put a length rotary switch on a Sequential Switch? I've wired
> >> >one in after Ken's description (I think) and it's acting all
> >> >bewitched... skipping over positions, same length of positions no
> >> >matter how the switch is wired, things like that. Anyone any hints?
> >> >Thanks,
> >> >Andrew.
> >> >
> >> >
> >> >------------------------------------
> >> >
> >> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >> >Yahoo! Groups Links
> >> >
> >> >
> >> >
> >> >
> >>
_______________________________________________________________________
> >> Ken Stone sasami@
> >> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> >> Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>
> >>
> >
> >
> >
> >------------------------------------
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >Yahoo! Groups Links
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>