Hi Jim,
"SN" stands for summing node. You can add extra inputs here by
connecting them through 100k resistors. Take a look at the schematic
again and it should present itself. Use a 100k resistor for each
extra input, and do not connect directly here without the resistor(s.)
Great module.
Regards,
Michael Ford
--
http://www.metalbox.com
"SN" stands for summing node. You can add extra inputs here by
connecting them through 100k resistors. Take a look at the schematic
again and it should present itself. Use a 100k resistor for each
extra input, and do not connect directly here without the resistor(s.)
Great module.
Regards,
Michael Ford
--
http://www.metalbox.com
On Feb 20, 2008, at 4:30 PM, James Elliott wrote:
> Do you need to do anything special to hookup a audio signal to the
> "audio sn"? i.e. can I just hookup the wire directly to the input
> or should I connect a resistor first? If so, what value resistor?
>
> What does "SN" stand for anyway?
>