The trigger input on the Cynare is AC coupled. It will only work with a
square or pulse type waveform. The MOTM-380 has -5V to +5V sine and
triangle waveforms only. You need to use a MOTM-390 or other LFO that
has square waves. Why did it work with the MOTM-800? Because you
dialed in a fast Attack time.
-Richard Brewster
http://www.pugix.com
Tom Adam wrote:
square or pulse type waveform. The MOTM-380 has -5V to +5V sine and
triangle waveforms only. You need to use a MOTM-390 or other LFO that
has square waves. Why did it work with the MOTM-800? Because you
dialed in a fast Attack time.
-Richard Brewster
http://www.pugix.com
Tom Adam wrote:
> I've tested my drum sym and cynare with a MOTM-800 ADSR and they are
> working fine. But when I connect a MOTM-380 Quad LFO, these modules are
> not triggerd. Did I do something wrong? I think the LFO gives a -5V to
> 5V sin or tri signal out. Or was it -2.5V to +2.5V, can't remember now.
> Cheers,
> Tom
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
> Yahoo! Groups Links
>
>
>
>
>