Well I tried the capacitors but it didn't do anything. What are the
capacitors for? Is there a certain part of the circuit I should look at for
errors? Also the VCO pitches up quite a few octaves when I use my XR VCO's.
When I try my Oakley and MOTM VCO's I cant even hear them since they go so
far up.
thanks
pete
capacitors for? Is there a certain part of the circuit I should look at for
errors? Also the VCO pitches up quite a few octaves when I use my XR VCO's.
When I try my Oakley and MOTM VCO's I cant even hear them since they go so
far up.
thanks
pete
On 2/8/07, sasami@... <sasami@...> wrote:
>
> Yes, you've probably made an error or two in construction. If everything
> seems right, solder a 47pf capacitor between pins 1 and 2 of the TL072,
> and
> another between pins 6 and 7.
>
> Ken
>
> > I just finished wiring my Sequential switch and everything looks fine.
> The
> >LEDs cycle according to the clock input and the Reset and direction
> switches
> >work. The problem is that nothing comes out the Output. When I patch the
> >output of the switch into the CV input of a VCO it just pitches the VCO a
> >few octaves up but there are no steps. It just stays on one note and
> >tweaking the pots does nothing. Any ideas what is wrong? Have I
> overlooked
> >something?
> >
> >Thanks
> >pete
> >
> >--
> >http://www.myspace.com/23isgood
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
> Yahoo! Groups Links
>
>
>
>
--
http://www.myspace.com/23isgood
[Non-text portions of this message have been removed]