Cgs synth

>The tracks and soldering look good.
>I'm not sure but I think there may be a problem with the transformers.

I doubt it. They are all tested here before they leave.

>I found that the 14 pins in the middle(8 from diodes and 3 from each
>transformer) all produced the signal from the middle input.

>The two pins on the right produced the signal connected to the right
>jack while the two pins on the left were silent.

These two pins would be the output.

with a signal at one end and nothing in the middle, see if you get a signal
on the other side of that same transformer. Turn it around and try it the
other way too (i.e. the other transformer).

Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>