Wow,
thanks for getting back so quickly.
Two more questions, if I may. Q5, below sounded dumb, but what I
meant was what is the voltage range (ie is it compatible with Doepfer
& A systems kit - I assume it is).
And Q6, is there a simple way to make the pulse out a trigger?
Much appreciated
Stuadh
PS - I've spent the last few months agonizing over which sequencer to
buy and here I find the perfect one all along!
thanks for getting back so quickly.
Two more questions, if I may. Q5, below sounded dumb, but what I
meant was what is the voltage range (ie is it compatible with Doepfer
& A systems kit - I assume it is).
And Q6, is there a simple way to make the pulse out a trigger?
Much appreciated
Stuadh
PS - I've spent the last few months agonizing over which sequencer to
buy and here I find the perfect one all along!
--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
> Programmer:
>
> >1. I'm not sure I understand how to limit the number of steps in the
> >sequence and what exactly the Ext Pulse does. For example, if you
> >want to run from steps 3 through to 7, would you patch the pulse of
> >step 7 to the Ext pulse of step 3?
>
> You would patch the pulse of step 8 (not 7) to Ext pulse of step 3. When
> step 8 is activated, it immediately activates step 3, cancelling
itself in
> the process.
>
> >2. With respect to the push buttons, do these act as a "reset to this
> >step" button?
>
> Exactly.
>
>
> >3. Would wiring a debounced, push-button from the +15V to the up (or
> >down) input (as suggested in an earlier post) act as a one step
advance?
>
> Yes.
>
> >4. On the A boards, pulse out circuit, could all stages be wired
> >through switches to a single LED, 820R, pulse-out and 680R? The
> >reasoning behind this is to replicate more conventional sequencers
> >where each row of switches goes to a single indicating LED and socket.
> > And then add four rows of switches.
>
> You would want to add a 1N4148 diode into the circuit per stage, exactly
> where the LED is shown, then go to your switch etc.
>
> >5. What voltages do the pots put out (at 12V if anyone knows,
> >otherwise, at 15V)?
>
> The total is adjustable by tweaking the values of the resistors in
the CV
> buffers
>
> >6. What voltage do the stage pulse outs, the CPO and AEP produce? Do
> >the stages produce a trigger or gate?
>
> 5- 6 volts approx. Pulse Outs are GATE. CPO/AEP triggers. There may be a
> fault with one of these I haven't investigated yet. I've heard of
some CPOs
> apparently not working - it may just be user error.
>
> Ken
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>