Cgs synth

>On the Bi-N-Tic board I got, the
>1N4148 diode was hooked to the wrong end of the 100K resistor by the
>etch. It should go to the base of the transistor (as on the
>schematic). I corrected this. If connected to the other end, the diode
>could impact the FET switching properly, I believe. Ken?

Certainly the diode is in the wrong place and would affect VCO to counter
coupling. It may also behave as a short on the oscillator itself. I've noted
the required modification on the web page.

Ken

_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>