--- In cgs_synth@yahoogroups.com, "mesonproductions"
<mesonproductions@y...> wrote:
g'day
Ken's page on the CGS04 DC mixer has some helpful diagrams.
note this output pot has just 2 wires running to it and is not
connected to ground. The pot is optional and if you do use it, there
is a 47K resistor to be left off the board.
cheers
andrew
<mesonproductions@y...> wrote:
> hi,mixer.
> I'm building the stacked cgs30's.
> I need some clarification with the wiring of the out pot on the dc
g'day
Ken's page on the CGS04 DC mixer has some helpful diagrams.
note this output pot has just 2 wires running to it and is not
connected to ground. The pot is optional and if you do use it, there
is a 47K resistor to be left off the board.
cheers
andrew