Bc2000 (for the BCF2000 & BCR2000)

can you set up the push/turn encoders to act in the following way.
turning in normal mode  contols one parameter, while pushing and 
turning activates a different cc command.
i find the manual to be pretty vague on this.
do the push functions of these ecoders  act as a switch or as a mode 
changer allowing say one encoder to have two turnable functions?

The push function of the encoder is completely separate from the turn 
function. The push function is an off/on switch basically (as in, for 
example, note on/off).

It sounds, however, that what you want is possible using the four 
encoder group buttons. This permits up to four turn functions for each 
encoder.

Art Hunkins

--- In bc2000@yahoogroups.com, "one_point_twentyone_jigawatts" 
<one_point_twentyone_jigawatts@...> wrote:

>
> can you set up the push/turn encoders to act in the following way.
> turning in normal mode  contols one parameter, while pushing and 
> turning activates a different cc command.
> i find the manual to be pretty vague on this.
> do the push functions of these ecoders  act as a switch or as a mode 
> changer allowing say one encoder to have two turnable functions?
>

ahh ok ok i get it now no wonder i couldnt figure out how to make it
do that hahaha cuz its not supposed to! thanks for the help