Bc2000 (for the BCF2000 & BCR2000)

Hi all,

I'm really struggling to get the BCF2000 set up to control the Mixer
screen of my Roland Fantom X.

Initially, I just want the 8 sliders to control the volumes of the
first 8 Patches in a Performance, like a normal mixing desk, with the
two rows of buttons above doing Mute & Solo for each voice.

Depending on the stand-alone mode I put the BCF in, I either get an
inescapable MIDI feedback loop, or nothing until I try to teach the
sliders via LEARN mode, where I just get a "bAd" message whatever I do.

At the moment, I've got the IN and OUT of the BCF connected to the OUT
and IN of the Fantom-X, respectively. 

I've tried the BCR Mixer file in the Files of this group, but with no joy.

Are there any settings I'm missing on the Fantom-X? 

Can anyone shed any light on this, please?

Thanks & regards
Andy

Hi Andy,
I have posted a reply on the Fantom group.

If it doesn't help let me know and I try to think of something else

Royce
--- In bc2000@yahoogroups.com, "Andy" <bachontothis@...> wrote:
>
> Hi all,
> 
> I'm really struggling to get the BCF2000 set up to control the Mixer
> screen of my Roland Fantom X.
> 
> Initially, I just want the 8 sliders to control the volumes of the
> first 8 Patches in a Performance, like a normal mixing desk, with the
> two rows of buttons above doing Mute & Solo for each voice.
> 
> Depending on the stand-alone mode I put the BCF in, I either get an
> inescapable MIDI feedback loop, or nothing until I try to teach the
> sliders via LEARN mode, where I just get a "bAd" message whatever I do.
> 
> At the moment, I've got the IN and OUT of the BCF connected to the OUT
> and IN of the Fantom-X, respectively. 
> 
> I've tried the BCR Mixer file in the Files of this group, but with
no joy.

> 
> Are there any settings I'm missing on the Fantom-X? 
> 
> Can anyone shed any light on this, please?
> 
> Thanks & regards
> Andy
>

Hi Royce,

I'll find your reply there, then. :o)

Thanks
Andy

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi Andy,
> I have posted a reply on the Fantom group.
> 
> If it doesn't help let me know and I try to think of something else
> 
> Royce
> --- In bc2000@yahoogroups.com, "Andy" <bachontothis@> wrote:
> >
> > Hi all,
> > 
> > I'm really struggling to get the BCF2000 set up to control the 
Mixer
> > screen of my Roland Fantom X.
> > 
> > Initially, I just want the 8 sliders to control the volumes of the
> > first 8 Patches in a Performance, like a normal mixing desk, with 
the
> > two rows of buttons above doing Mute & Solo for each voice.
> > 
> > Depending on the stand-alone mode I put the BCF in, I either get 
an
> > inescapable MIDI feedback loop, or nothing until I try to teach 
the
> > sliders via LEARN mode, where I just get a "bAd" message whatever 
I do.
> > 
> > At the moment, I've got the IN and OUT of the BCF connected to 
the OUT

> > and IN of the Fantom-X, respectively. 
> > 
> > I've tried the BCR Mixer file in the Files of this group, but with
> no joy.
> > 
> > Are there any settings I'm missing on the Fantom-X? 
> > 
> > Can anyone shed any light on this, please?
> > 
> > Thanks & regards
> > Andy
> >
>