Bc2000 (for the BCF2000 & BCR2000) group photo

Yahoo Groups archive

Bc2000 (for the BCF2000 & BCR2000)

Index last updated: 2026-04-28 23:16 UTC

Message

Re: BCR2000 and the NoOS message - Help please

2008-03-26 by Jim Burrill (UK)

I've ordered another MIDI interface Karl and I will take it from 
there. It's a Midiman interface?  Hope this one will work.
Thanks for the help Karl.

Jim




--- In bc2000@yahoogroups.com, "Karl Lurman" <karl.lurman@...> wrote:
>
> Sounds like a dodgy midi cable. Unless you don't have the cable 
going
> in correctly. It should go midi out (from the usb) to midi in (on 
the
> bcr) and midi out (on the bcr) to midi in (on the usb). I too have 
had
> the misfortune of using the behringer update proggy and had the same
> NOOS experience. Luckily I was able to borrow a USB->midi adaptor, 
but
> prior to that I tried to make my own midi cable (with a few loose
> wires I had around the place). It seemed as though it was working,
> because the midi lights would flash when I tried to send the sysex
> file to the unit, however the update would not occur. It was only
> until I used a proper cable that I saw the progress indicator on the
> index (an increasing number and small cycling animation).
> 
> Good luck dude!
> Karl
> 
> On Tue, Mar 25, 2008 at 4:07 AM, Jim Burrill (UK) <smogthemog@...> 
wrote:
> >
> >
> >
> >
> >
> >
> > I have just purchased BCR2000 off of Ebay and all was well when I 
got
> >  it. I required it for live MIDI control of Mamba Black Laser show
> >  software. It was running v1.07 OS when I got it and upon trying 
to
> >  update it using the POXY Behringer update program it now only 
reads
> >  NooS in the LED display :(
> >  This now means I have no USB acsess and can only OS dump via 
MIDI from
> >  the PC. Well I have tried that about 50 times now but to no 
avail.
> >  I am running Windows XP Pro SP2 and with an Ebay bought USB to 
MIDI
> >  interface cable.
> >  I have pressed the STORE/LEARN buttons opon switch on (to give 
the LOAD
> >  sequence) and dumped the file to it via MIDI but nothing. The 
display
> >  dosen't change at all. The MIDI light flashes but nothing at the 
end.
> >
> >  Any help will be greatly appreciated.
> >  Thanks
> >  Jim Burrill
> >
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.