Bc2000 (for the BCF2000 & BCR2000)

Hi all,

i'd like to understand the sysex that are sent to the LCD emulation
(like huskervu), most of all when in VST inserts mode....my idea would
be to see if it's possible to associate other actions to the host output. 

An example: BCR 2000 in MCU emulation mode; i switch to insert editing
mode, i choose insert 2, the virtual display updates showing the name
of the FX, the on/off status etc - all this happens via sysex - if i
send this sysex string to a suitable app (a modular host like Usine)
and i'm able to grab the name of the FX among this sysex string (here
comes the question), i could associate a different program change to
each FX name - sending the program change to the BCR, i could
automatically associate the correct preset to each FX...

i suppose something like this is the basic principle on which
Novation's Automap is based, ie using the feedback from the host to
change the controller assignement accordingly - i have a feeling we
could so something similar on our BCF/BCR....

any hint on where to look to interpret the host feedback?? i've seen
two or three display emulation in the files section, and maybe there's
someone who coded them or helped to code or whatever...  

Ciao,
Goyya