Bc2000 (for the BCF2000 & BCR2000)

Hi Mark

> (Perhaps I should mention at this point that I have an FCB1010 myself,
> and I have also written my own (never-published) FCB1010 editor. I
> don't have the uno-chip, though.)

Me too. How many editors of the FCB1010 are there?

> I sent SysEx messages of varying lengths (containing only zeros in
> between the obligatory F0 and F7) from a sequencer program (Sonar 6,
> as it happens) to my BCF2000 via its USB MIDI connection. The BCF
> passed these messages on to its standard MIDI Out, then that was
> looped back directly to its standard MIDI In, and sent back to the
> computer via the USB MIDI connection. There the messages were captured
> by a MIDI monitoring program.

What is the MIDI byte tx rate you are testing with?
Are there gaps between bytes or blocks or are you going flat out
(31.25K bits per second / 10, that is 3125 bytes per second) ?

I found the USB to be very slow, but I'm not sure if it is hardware or
the driver. Surly it is interrupt driven so I guess it is more likely
to be the driver.

Do the Mac folk out there have trouble??????

Royce