Bc2000 (for the BCF2000 & BCR2000)

I found a problem with my BCR's USB port. I had to update to 1.1.1.1 
drivers to see when there was a USB connection problem though as thee 
old drivers don't show a notification when there's a problem in windows. 
Next time it breaks on you, try holding the lead in a position, either 
leaning up or down or to either side and see if it works then.

-k0mp0

djsynchro wrote:
>
> Same shit here.
> I have a BCR and a BCF that i use in cubase/mackie mode.
> If I reinstall the driver(s) the BCR will work for a bit again, then
> it will stop working. The BCF always works.
>
> I have tried everything swapping leads reinstalling drivers etc. By
> the way: I have a laptop for performing live and the BCR works fine
> with it, so definitely no hardware problem!
>
> Mystifying. I just tried having one controller on the back ports, one
> on the front USB (It's tru they connect to different parts of the
> motherboard.
>
> Well, now they're both working - for now. If it stays working then
> i'll post back as that would be a solution then.
>
> It's been driving me nuuuuuuuts! I've had the BCR for months and i
> still didn't use it for anything!
>
>