Bc2000 (for the BCF2000 & BCR2000)

It doesn't work but if you like, you can check things over in VNC?
( www.ultravnc.com )

Regards,
-Ryan


rpcfender wrote:
>
> Hi Ryan
>
> on my editor go to the "Editor" tab, then the "Save & Get" tab and look
> for the area called "Sysex Header Bytes"
> Normally this is set to the Universal setting and for people with just
> one machine it is fine. You will need to select the BCF or BCR. There
> is a device ID selection underneath if you need it.
>
> I haven't been able to check this except on my BCR. Let me know how you
> get on.
>
> Royce
>
> --- In bc2000@yahoogroups.com <mailto:bc2000%40yahoogroups.com>, 
> "k0mp0" <k0mp0ser@...> wrote:
> >
> > Just to clarify what I meant here, my BCR and BCF are linked together
> > via MIDI cables with the BCF hooked to the PC via USB, so Royce's
> > editor, whenever it tries to refresh or send, receives from both units
> > at the same time, rending the MIDI in/output of the program useless to
> > me unless I turn off my BCR.
> >
> > Regards,
> > -Ryan
>
>