Bc2000 (for the BCF2000 & BCR2000)

I agree.

Art Hunkins

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi Art
> > 
> > I'm not quite sure how to answer, but - using your script - the 
> > output does cover the complete pitch bend range, 0 0 to 127 127 
(all 
> > dec here).
> > 
> > Every point on the fader registers an identical value, whether 
you go 
> > fast to get there or not. Of course, if you go slower, more 
> > intermediate values are registered (as seen in MIDIOx). Going as 
> > slowly as possible, there is a low byte change of about 40-50 
(dec); 
> > so certainly far more than simple high-byte values (128 of them) 
can 
> > be used, if desired.
> > 
> So it looks like the faders have a resolution of 127 * 3 about 380.
> Thanks makes sense. I guess there would be no need to use the
> resolution command and just rely on the sampling rate of the fader
> 
> Thanks 
> 
> Royce
>