Bc2000 (for the BCF2000 & BCR2000)

Hi,
I am trying to create a new preset and PC program for the Yamaha TG33 and SY22.
I only have a TG33 but I have read that the SY22 cannot respond to single parameter like the TG33 but the info is a bit vague.

Plompy Software's editor sends the whole patch sysex each time a parameter is changed and perhaps, along with the fact that the SY22 manual says nothing about the parameter sysex, this is where the idea came from.

Here is a BC2k patch that has the top row of encoders putting out the parameter sysex for the TG33
Enc1 to 4 are wave selection for Elements A to D. Enc5 to 8 are volume (Yamaha reverses the numbers so 127 is the softest) for Elements A t D.

http://f1.grp.yahoofs.com/v1/MHH-UHWcQcYYF9HF19Ui-VQ-PMUOWBcM9F1Kij8mu3jkrjtyAWvREzNuSJbJSX7HaEhwDdb6vxuO9MKVDcL-WA/Presets/SY22%20test.zip

I was wondering if some one with a SY22 could test this BCR2k preset for me and let me know if it works for the SY22.

The zip file has both a .syx and BC2 file in it.

I can't get the TG33 to put out a patch change message when you change a patch on the unit.
This means my program won't have any idea that it needs to request data to keep in sync.

So if the SY22 can9;t respond to single parameters I might cut my losses and move onto another synth instead .

Thanks for the help.

Royce