Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "katzenjammer2000" <raf.katigbak@...> wrote:
> thanks for your hard work mapping out the Mopho parameters! I too am excited to try these out.  Unfortunately I've been getting Error 11 messages when I try to upload the presets to the BCR. I'm upping things using Sysex Librarian on Mac OS X 10.6.6 and have not had any problems dumping other presets. 
> 
> anyone else have this problem with these Mopho patches?

Yes: I also get lots of Error 11 messages when I try to load e.g. "bcr mopho patch 1.syx" in BC Manager.

BC Manager emulates the error behavior of the BCR quite accurately. It also mentions in which BCL source lines the errors occur, so you or anyone else might use BC Manager to easily pinpoint all these errors. But of course BC Manager only runs under Windows.

As described in "BC MIDI Implementation.pdf" (available from http://home.kpn.nl/f2hmjvandenberg281/bc2000.html), section 21.2.12, Error 11 means "Argument value out of range". It occurs when a numerical argument exceeds its allowed range.

In the case of "bcr mopho patch 1.syx" the arguments to many ".easypar NRPN" are invalid. See BCMI section 16.4 for a description of the correct format.

Hope this helps,
Mark.