Bc2000 (for the BCF2000 & BCR2000)

Care to elaborate?  I can't get it to work like a charm.  Do you mean it works in learn mode, or?

--- In bc2000@yahoogroups.com, James Reeno <jamesreeno@...> wrote:
>
> Just use the BCR...it works like a charm.
>  
> REENO
> Funky music For The New Millenium
> WWW.SPAZZOID.COM
> (Where music still Matters)
> 
> On ITunes:
> http://itunes.apple.com/us/album/the-real-electrofunk/id354096689
> http://itunes.apple.com/us/album/close-encounters-808-kind/id302452252
> http://itunes.apple.com/us/album/360-degrees/id312541576
> http://itunes.apple.com/us/album/the-acid-jazz-project-vol/id349442979
> 
> CD Releases:
> 
> WWW.CDBABY.COM/CD/GANGWAYINVASION
> WWW.CDBABY.COM/REENO1
> 
> WWW.CDBABY.COM/REENO2
> WWW.CDBABY.COM/REENO3
> WWW.CDBABY.COM/MANOREZAMUSIC
> WWW.CDBABY.COM/DRSEXX
> 
> 
> Vinyl Releases:
> http://www.spazzoid.com/html/RELEASE%202008%20VINYL%20Summer.html
> 
> http://www.spazzoid.com/html/RELEASE%202003%20SMD.html
> 
> http://www.spazzoid.com/html/RELEASE%202005%20I%20Luv%20it.html
> 
> 
> 
> 
> 
> 
> ________________________________
> From: thermos1979 <natewood@...>
> To: bc2000@yahoogroups.com
> Sent: Wed, May 11, 2011 6:13:28 PM
> Subject: [bc2000] Re: Roland JX-10 and BCR2000?
> 
>   
> Thanks folks!  I was thinking this, but wasn't sure.  I'm on a mac, and have 
> tried desperately to get that software to work through wine, etc but no avail.  
> What a headache! 
> 
> 
> If someone wanted to post a JX-10 template, that would be amazing. 
> 
> --- In bc2000@yahoogroups.com, "baumont987" <geebeex@> wrote:
> >
> > Hi,
> > 
> > Withe the Colin Fraser update, the JX does not send Sysex, but does only
> > receive them.
> > 
> > The easiest way to control the JX-10 with the BCF is to use the GB-800
> > software, it's a PG-800 emulator that can handle automation:
> > http://greg.baumont.free.fr/?page_id=158〈=en
> > <http://greg.baumont.free.fr/?page_id=158&lang=en>
> > 
> > 
> > --- In bc2000@yahoogroups.com, "thermos1979" <natewood@> wrote:
> > >
> > > Hi Folks.  I've got a JX-10 with the Colin Fraser rom in it.  The
> > other 2 roms are 1.9.  Will these older roms inhibit sysex in any way?
> > >
> > > And what magic trick am I missing to get learn mode to work between
> > the jx 10 and the BCR20000?  I can get it to learn/see key presses on
> > the JX as well as the c2 slider, but not any of the parameters with the
> > alpha wheel.  Am I missing something?
> > >
> >
>