Bc2000 (for the BCF2000 & BCR2000)

yes that's right -
I can't remember the exact position but they were a bit tricky to find.
I ended up breaking the tabs on one side, which hasn't had any detrimental effect.

/m

On 4 Feb 2011, at 03:38, djo3yk@... wrote:

> 
> Someone please correct me if I'm wrong but From what I remember there are two tabs on each side which need to be pushed towards the centre of the unit to get it to pop off.
> 
> 
> On 2011-02-03, at 6:17 PM, "shellfritsch" <shellfritsch@...> wrote:
> 
>> hello
>> 
>> i just picked up a used bcr2000 for real cheap. looks like it was dropped, as three of the encoders are missing the knobs & shafts. i tested the encoders out with a small tool & they still work great- in fact the whole unit functions just fine. i tried gluing in some replacement shafts to attach knobs to, but one of the broken encoders is in the top row & thus a "push" encoder. my attempts so far to make a proper shaft that still has a "push" to it have been unsuccessful.
>> at this point i'm thinking it would be better to just replace the encoders.
>> has anyone here been through this process? part numbers?
>> also, any tips on disassembling the unit? i removed the screws from the side panels, but they seem stuck to something, don't want to force it...
>> 
>> thanks!
>> -sean
>> 
>>