Bc2000 (for the BCF2000 & BCR2000)

Hi Pablo,
I've not experienced anything like that, but my *guess* would be that you're having a midi-loop problem. Have you checked to make sure your inputs and outputs are properly setup in your sequencer? I'd bet that's the problem.
Cheers,
e

--- In bc2000@yahoogroups.com, "fullanapablo" <pablofullana@...> wrote:
>
> Hi everyone,
> I'm from Aregntina, so sorry for my english. I'm new here, and I'm having a little problem with some push-enconders.
> First and second enconders work great. But from 3rd to 8th something strange happens.
> At first sight, I thought it was a speed problem, they seemed to be incresing/decreasing slowly. But I continued testing with some speed parameters changed and I realized that speed was not the problem.
> So, what happens? I really don't know. I think those enconders are sending values wrongly, so that's why it seems to increase/decrease not as smoothly as it shoud. Sometimes I move the encoder in order to increase the value and as it is increasing, it goes back a couple of values and then continue. It's weird, and I don;t know how to explain it better.
> For example:  0,1,2,3,...,59,60,59,58,57,58,59,60,61,62...127. But I only move the encoder in order to increase, so this should not be happening. I repeat, with the first and second encoder, there are no problems.
> 
> It happens with every program, such as NI Traktor, Ableton Live, etc. And even if there is no program running.
> 
> I only have to add that i'm using the option of Bar in the leds output option, but as it's the same for 1st and 2nd encoder, I guess that's not the problem.
> 
> Anyone has some idea of what should be happening?
> 
> Thanks, and again, sorry for my english.
> 
> Pablo.
>