thanks for the reply.
so just to be clear before i go out and buy yet another cable which doesnt work....
i need to redload the firmware onto my bcr.
the cable goes into the midi in on the bcr and from my pc usb port?
is that right?
thanks again.
Blutschaf@... wrote:
hi, i just joined this group.
Graham Morrison wrote:
> hello!
>
> the answer to your first question is that you need to send the data to
> the bcr via a midi cable plugged in to the bcr. the usb input on the
> bcr won't work.
updating the firmware to 1.10 via usb worked for me (win2k). but i'm
not able to save presets to the bcr. i get the following error
timeout error while sending "$rev R1" we are currently working on
"$rev R1"
and the application (0.2 beta 3) hangs. any ideas how to get this
working? (yes, after reading a few posts here i had the idea it might
only work via midi cable, but since i don't have one... maybe there is
some other solution)
driver is 1.1.1.1 btw
Yahoo! Mail
Stay connected, organized, and protected. Take the tour