Bc2000 (for the BCF2000 & BCR2000)

Cool - glad you figured it out.
"Share your revision" - I mean post your preset for other people to use and modify as they like.
Include a screen shot of the layout from bcmanager, so people know what they are getting.
I'd have to see your preset to tell what's going on with sends.
Kip

--- In bc2000@yahoogroups.com, "matschdreck" <matschdreck@...> wrote:
>
> Ok, 
> i finished my preset. Actually, it was my own fault, with the solo�s. I have overlooked, that the velocity value was 1. You live and learn. I again saw on your (kip) mackie command set, that the solos were indeed Note 8-15, so i thought the fault must be somewhere in my own adjustment. 
> I still can�t make the Sends follow the < Bank > Buttons. And the LED display of the Pan�s don�t react properly, so i had to turn them off. Similar problem with the LED�s of the Buttons (Solo and Record_Arm). They react correctly if the buttons are pushed on the screen with the mouse, but when hit on the BCR itself, sometimes they react, mostly not. But really, thats just peanuts.
> Apart from that everything is fine. Finally my BCR makes sense. And it wasn�t even that difficult with BC manager, once you understand the meaning. Copy&Paste. It�s so great all these people working on this things. I don�t think i would have got there, without the internet. At least not this fast. But now...deluxe. 
> 
> > I'm interested in you revision, I seem to have an addiction to mackie emulation I just can't shake.
> 
> I don�t know if i understood correctly. What does "revision" mean is this case? (i don�t worry about your addiction). You mean, you would like to know how i arranged my preset? Or did you mean the exact midi-commands?
> 
> Push Encoders: 
> Group 1:               Mute/Pan
> Group 2:               Clip fires
> Group 3:               d.pots
> 
> Buttons:               Solo
>                        RecArm
> 
> Encoders: upper row:   Send A
>           middle row:  Send B
>           lower row:   Volume
> 
> The buttons on the right side:   Stop     Play
>                                  Option   Sess/Arr 
> 
>                                  Undo     Redo
>                                  < Bank   Bank >
> 
> everything same for each channel. I made/need/like it this way, because i use my laptop more as a recording interface, rather than as a dj or live performing tool. Thats why i need fast checks on the pan, mute, solo, rec and sends on each channel quick hand. Clipfires and dpots are very acceptable add ons though.
> 
> 
> 
> --- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@> wrote:
> >
> > Hey,
> > 
> > It is early - and I am slammed with home projects today -
> > I will have to read you email in more detail to try to understand what you are doing.
> > Go to my GenMce page http://shoshin.110mb.com/genmce
> > and I have a link to the mackie command set at 
> > http://shoshin.110mb.com/genmce/mackie_commands/Mackie_commands.htm
> > 
> > Thanks for the praise!  I did not do it alone.
> > I'm interested in you revision, I seem to have an addiction to mackie emulation I just can't shake.
> > I also have helped develop a little pc keyboard mackie emulation.
> > http://shoshin.110mb.com/rockiplaunch
> > 
> > Sorry to the group for all the links there to other, non bcr, stuff.
> > 
> > So I need to read, what you are trying to do again...
> > Ok... that was the second pass on my reading...
> > I think you can do the things you seek.  See the chart of the notes you need above, the rest of the stuff is there too.
> > 
> > 1 comment - the vpots (pans/sends/plugins) returns....
> > They will stay pans as long has you don'g hit the sends returns or plugins button. However, if you do, then they are not pans any more.
> > If you know that you are not going to use sends or plugins control...
> > You could always have each encoder send the note for pans before the controller info... a stacked command so to speak, meaning when you turn the knob it sends the not on...   hmmm... that might get annoying or cause some other thing to happen. That is what happens on the clip fires.
> > Use bcmanager to look at the preset... make a new preset and copy and paste the notes to the bank of buttons, should be really easy to move whatever you want about.
> > 
> > Kip
> > 
> > --- In bc2000@yahoogroups.com, "matschdreck" <matschdreck@> wrote:
> > >
> > > Hi everyone, 
> > > i have the BCR and i am trying to tinker my own preset for ableton (in mackie mode). I am not even half way there, but somehow it is fun trying. The templates from kip were very helpful so far, really great piece of work. But i would like to get a different assignment to the knobs, so its more suitable to my workflow. I have trouble finding the right midi notes for the solo switches. Which notes do i need to assign to the buttons, so they control the "Solo" switches of the channels? I read that mackie uses Note 8-15 for the solo�s but no effect there. Any suggestions? 
> > > Then, is there a possibility to assign the push-encoder row to permanently control the channel�s pan AND mute, and then assign them in one of the other Encoder Groups to Clip Arm�s at the same time? Or wait, first, how to assign their encoder funktion to Pan? I managend to match their push-funktion to mute, but i can�t find the pans for their encoder funktion at the same time.
> > > Plus i would like to assign the 1st and 2nd encoder rows to send A and send B (just like abletons map for BCR) but in a way, the bank<> buttons have an effect on these. So far i tried CC 81 -CC 96, but when i push bank> the other buttons (mute, rec) jump to channels 9-16 while the send encoders stay with 1-8. 
> > > This Behringer BCR is like Linux.
> > >
> >
>