Bc2000 (for the BCF2000 & BCR2000)

Hi.  New member here, so please forgive me if this issue has come up before.  I wasn't able to find it by searching the forum.

I have a Sequential Circuits Six-Trak that I've created a template for using BC Manager.  It's awesome, but I have one annoyance that I can't seem to find a work around for.

Most of the channels on the Six-Trak are calibrated to something other than 0-127.  (For example, the filter attack amount has 16 steps from 0-15.)  So when programming the Six-Trak locally the user enters in a value from 0-15, but when controlling it remotely the user sends values from 0-127 which the Six-Trak interprets as 0-15.  Make sense?

What I would like to do is have the BCR *display* a count from 0-15 while *sending* a value from 0-127.  This puts the numeric display in familiar territory for the user and should lower the precision of the knobs to the synth's limitations.

Thanks.