Message
Re: n00b w/used BCR2000, hoping to use on OS X w/ Max/MSP
2009-07-09 by rpcfender
> Meantime, I figured out how to set at least some of the BCR2000 by hitting edit and wiggling a knob and then setting that rotary up with top row and then exiting and hitting store(2x) to save it.
That's one way and if you are using MSP/Max it may be all you need
I don't quite get how to set up the push buttons and the push encoders (rotary knobs with push buttons on them)... but i am getting there by trying to decipher the manual and googling around.
The same way as you did for the encoder. Hold EDIT and press a button or turn an encoder. Now you are in edit mode for that control. Exit when finished.
Top 8 encoders with buttons. They can be programed as if they are 4 sets of 8 and you swap the function with the ENCODER GROUP buttons on the top right.
So
1 to 8
9 to 16
17 to 24
25 to 32
These encoders have a built in switch/button and so the buttons are numbered the same way
The next 2 rows of buttons are 33 to 40 and 41 to 48
The four buttons on the bottom right are
49 50
51 52
Three row of encoders below the buttons starting at the top left
33 to 40
41 to 48
49 to 56
You can get some extra buttons but you probably won't need them
There are many things that the BCR is capable of that you can't program with the unit alone. You will need to use a computer.
Best of luck
Royce