Bc2000 (for the BCF2000 & BCR2000)

> --- In bc2000@yahoogroups.com, "Mark van den Berg" <markwinvdb@> wrote:
> 
> > In general there are 2 firmware upload methods:
> > 
> > A. Bidirectional.
> > This is what BC Manager's "Send firmware" routine does. In this case you'll need to connect the sound card to the BCR's "MIDI IN" and "MIDI OUT A" ("MIDI OUT B" is completely dysfunctional).
> > 
> > B. Unidirectional.
> > You can use any computer program capable of opening the firmware syx file and sending it via MIDI. So e.g. BC Manager, MIDI-OX, or even "MIDI Tools" (also downloadable from mntn-utils.110mb.com - once it's back on air...). Obviously, in this case you only need to connect to the BCR's "MIDI IN".
> > E.g. in BC Manager and MIDI Tools:
> > 1. Open the MIDI System Exclusive messages window via the main window's View -> MIDI -> System Exclusive messages.
> > 2. Open bcr2000_1-10.syx by executing File -> Insert.
> > 3. Execute Edit -> Select all.
> > 4. Execute Play.
> > 
> > I suggest you first try method A. If that somehow still fails, try method B.
> > 
> > Good luck!
> >    Mark.
> 

Hello, just wanted to reply, i did it as suggested the first way. Everything went good, and it works fine now. Perfect!