Bc2000 (for the BCF2000 & BCR2000)

I Had this problem twice, with two different machines.. i sent both back to the shop and they just changed it, without repairing nor testing it. In my case this problem was always the top-left push-encoder, wich need to be turned a lot to increase the value and it couldn't be set the highest defined value, even if I turned the encoder around a lot of times. It always jumped back from 126 to 121 (range 0-127) and some more random values occured. I believe, but no evidence, that the poti-board was broken.. If the prob still remains and its not related to the configuration auf the Encoder resolution. just try to get a fresh one.. they must know the problem

anybody got similiar problems?
It'd be interesting, cause I had to sent back alltogether 3 machines because of things like that. The last one, because it hasn't been recognized via USB port and funny, the full LED-ring was displayed on all encoders (not just the top row), but without any of them working... and the displayed was not working at all.



--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi 
> is this a problem on the same encoders with every preset?
> 
> If not then it is the preset setting.
> Get Mark's editor and dump the troublesome preset and adjust the 'Resolution' of the encoders and send the preset back to the BCR
> 
> The 4 numbers in the Resolution are 'how many Midi messages to send per revolution'. So if the problem is the preset then this is likely to have been set with a low number.
> The first number is the resolution if you turn it slowly, the last number is the resolution when you turn the encoder quickly and the other two are the resolution for in between speeds.
> 
> Royce
> 
> --- In bc2000@yahoogroups.com, "richweatherill@" <richweatherill@> wrote:
> >
> > i have had the bcr2000 for a couple of months now and recently encoders 2 and 7 seem to take several turns to get to the maximum. 
> > 
> > from what i have read this is not an error with the the bcr itself, but how it's set up or programmed. 
> > 
> > i have looked at the settings of the other encoders and tried to adjust accordingly but this changes nothing.
> > 
> > has anybody else had the same problem or can any of you offer any advice please.
> >
>