Message
Re: Can Bcf2000 control Roland Mks-80 and a Waldorf Microwave I ?
2008-11-21 by rpcfender
> Hi Royce, thanks for your answer. I would edit these beasts, as a
> software editors do. Adsr, cutoff, resonance (Mks-80) and all digital
> stuff with Microwave (edit waves etc.).
Start work on the MKS-80
I guess you are trying to build a MGP-80 with the BC
I hope you have a PC or are able to run a Windows program on the Mac because you can't do this sort of BC programming from the front panel of either the BCR2000 or the BCF2000
Work out the layout you want on the BC then get Mark's editor (for PC) from the files section
You can get the MKS-80 manual from here
http://www.analoghell.com/studio/index.cfm?fuse=downloads&id=58
At the back is a sysex section.
If this is a bit hard to follow, use a midi monitor program like MidiOx (for PC) and change the parameters you are interested in by using the MKS-80's front panel.
The MKS-80 should put our the sysex message you need to duplicate in your preset as you change the value from the front panel.
Try to work out the sysex spec from what the machine is putting out.
In Mark's editor look at the section called "Custom Output" on the control editor dialog
Hope this helps
Royce